[cisco-voip] Upgrading from CCM4.0 to CCM6.0

[Ali, Aziz]

That's explains everything. You lucky to have that time to play around
in lab. BUT

I  hope you haven't got the taste of real upgrade during limited
maintenance window. This is real BLOODY.

Z

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Tuesday, December 11, 2007 12:25 PM
To: Scott Voll
Cc: Cisco Voip Mailing list
Subject: Re: [cisco-voip] Upgrading from CCM4.0 to CCM6.0

It wasn't that big a deal, it was new servers, so I had plenty of time
to stage and restore the DMA in a lab, then I just dropped the servers
in...

The only catch was unity, and that took a few more hours than
intended, but no big thing...


J

On Dec 11, 2007 10:32 AM, Scott Voll <svoll.voip at gmail.com> wrote:
> only Jonathan can say I did a Huge upgrade and it's "NO Biggie"
>
> Tim--  I would make sure the upgrade is to 6.1 if your writing this
into
> your erate.  since your doing Erate I'm guessing this will be a after
July
> Upgrade.  I'm not an erate expert but be a little vag on the versions
so you
> can get the latest.  I had a School district that put the specific
version
> and that's what they got.
>
> Scott
>
>
>
> On Dec 10, 2007 1:11 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> > Not sure what you are looking for, but I did this upgrade this past
> > weekend (from CCM 3.3 to 6.0; Unity 4.0.4 to 5.0.1; CER 1.2 to 2.0
and
> > CCC 1.2 to MPX 2.0)...
> >
> > No biggie.
> >
> >
> >
> > Jonathan
> >
> >
> >
> >
> > On Dec 10, 2007 1:22 PM, Tim Reimers
<tim.reimers at asheville.k12.nc.us>
> wrote:
> > >
> > >
> > >
> > >
> > > Hi -
> > >
> > >
> > >
> > > I'm proposing in Erate funding requests that we upgrade our phone
system
> > > from:
> > >
> > >
> > >
> > > Two Call Managers running 4.13
> > >
> > > One Unity server running 4.0
> > >
> > > One Emergency Responder server running 1.2
> > >
> > >
> > >
> > > We have a mix of 7960 phones, 7905 phones, and 7912 phones
> > >
> > > All switches are 3560 series - a few 3524 switches for additional
phones
> > > here and there.
> > >
> > > All gateways are H.323 running 12.3 for the most part, and are
> > >
> > >
> > >
> > > What I'm wondering is if people out there have any documentation
details
> > > they wrote up as part of their upgrade planning.
> > >
> > >
> > >
> > > I'm going to be getting bids from vendors on this, and I'd love to
know
> of
> > > various and sundry gotchas, such as "7905 phones with an early
serial
> number
> > > aren't supported on CCM 6.0" and things like that, so that I can
know if
> a
> > > bidder has spotted and addressed potential problem areas.
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.