[cisco-voip] Monitoring a 2nd Line

[Todd Franklin]

OK.  I think that is the way I want to go.  is there anyway to not show
voicemail on the monitored extensions?  (if the monitored ext has vm
waiting, the icon is a flashing envelope.  I just want the phone icon, and
if they are on the phone, the jingling phone icoon.  Again, I am a CM4 user,
so maybe not)

On Dec 12, 2007 1:34 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> YES.
>
> If your using Unity you can setup a alt. extension and he could check it
> on either line.
>
> Scott
>
> On Dec 12, 2007 11:28 AM, Todd Franklin <toddnh65 at gmail.com> wrote:
>
> > You are correct, I have it setup as a translation pattern to his main
> > extension (1690).  So are you saying to add a 2nd line to his phone, let's
> > say 1691, and change the translation pattern to 1691?  Wouldn't he then have
> > to check 2 voicemails, though??
> >
> > Todd
> >
> >
> > On Dec 12, 2007 12:41 PM, Scott Voll <svoll.voip at gmail.com> wrote:
> >
> > > how do you have the private number forwarded?  Translation pattern?
> > >
> > > I would just setup the 7940 as a two line device and put the private
> > > line on the second button.  then the assistant won't have access.
> > >
> > > scott
> > >
> > >   On Dec 12, 2007 10:36 AM, Todd Franklin <toddnh65 at gmail.com> wrote:
> > >
> > > >   I have a user, Jim, and his main extension is 1690.  He has a
> > > > 'private line' with DID, and since our DIDs begin with 474, he's got a
> > > > 474-8123.  So on his phone, a 7940, I just have his main ext, 1690.  And if
> > > > someone rings 474-8123, I merely forward it to 1690.  Pretty
> > > > straightforwarsd so far, yes?
> > > >
> > > > Well, his admin wants to be able to know if he's on the phone or
> > > > not.  So I set up one of her lines (she has a 7960) with the 1690
> > > > extension.  And in CCM (v4) I set the Ring Setting (Idle) to Flash only and
> > > > the Ring Setting (Active) to Beep Only.  I have setup 3 other extensions
> > > > this way so she can tell who's on a call and who isn't.
> > > >
> > > > Anyways, when someone rings 474-8123, it is also ringing at her
> > > > phone (the Caller ID info shows up, and the MsgWaiting light flashes).  She
> > > > can also take the call, something I didn't want her to do.
> > > >
> > > > Any ideas??
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071212/644fb204/attachment.html