[cisco-voip] Analog conf phone off of VG224, meetme?

[Jonathan Charles]

Yeah, I think I need to load a T train code...



J

On Dec 15, 2007 10:28 AM, Justin Steinberg <jsteinberg at gmail.com> wrote:
> hookflash works in 12.4(9)T +
>
> docs on CCO indicate that 12.4(15)T supports meetme initiation via
> feature code **7 but the details aren't clear and i've not personally
> tried it myself.
>
>
> On Dec 14, 2007 7:43 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > ...and it didn't work...
> >
> >
> > On Dec 14, 2007 6:43 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > I tried it, set max calls to 2, and reset, VG224 is running 12.4.17a
> > >
> > >
> > > Jonathan
> > >
> > >
> > > On Dec 14, 2007 5:04 PM, Justin Steinberg <jsteinberg at gmail.com> wrote:
> > > > flash (hookflash) works with VG224 on sccp ports.  Ensure that you
> > > > have max calls >1 on the CM and that you have vg224 IOS code that
> > > > supports this feature.
> > > >
> > > >
> > > > On Dec 14, 2007 5:48 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > > > It sounds like a very basic feature that should already be there...
> > > > >
> > > > > Flash doesn't even work...
> > > > >
> > > > > What, exactly is the VG224 useful for again?
> > > > >
> > > > >
> > > > > Weird thing is that all of these features work with CME...
> > > > >
> > > > > wow.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Jonathan
> > > > >
> > > > >
> > > > > On Dec 14, 2007 4:45 PM, Wes Sisk <wsisk at cisco.com> wrote:
> > > > > > Honestly, it's not like Park where we have to provide visual feedback.
> > > > > > Sounds like a great question for Cisco account team.
> > > > > >
> > > > > > /Wes
> > > > > >
> > > > > >
> > > > > > Jonathan Charles wrote:
> > > > > > > Dumb question, but... why?
> > > > > > >
> > > > > > > I run into this all the time... customers have analog Polycoms and buy
> > > > > > > VG224s to use them... and can't.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Jonathan
> > > > > > >
> > > > > > > On Dec 14, 2007 4:03 PM, Wes Sisk <wsisk at cisco.com> wrote:
> > > > > > >
> > > > > > >> Not possible to initiate meetme from analog endpoint AFAIK.  Even the
> > > > > > >> vg248 which had the most extensive SCCP feature integration did not do
> > > > > > >> meetme.
> > > > > > >> http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_guide_chapter09186a0080087dd8.html#50106
> > > > > > >>
> > > > > > >> /Wes
> > > > > > >>
> > > > > > >>
> > > > > > >> Jonathan Charles wrote:
> > > > > > >>
> > > > > > >>> How do I get MeetMe to work from an analog conference phone that is
> > > > > > >>> plugged into a VG224? The Conf phone needs to initiate the conference.
> > > > > > >>>
> > > > > > >>>
> > > > > > >>>
> > > > > > >>> Jonathan
> > > > > > >>> _______________________________________________
> > > > > > >>> cisco-voip mailing list
> > > > > > >>> cisco-voip at puck.nether.net
> > > > > > >>> https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > > >>>
> > > > > > >>>
> > > > > >
> > > > > _______________________________________________
> > > > > cisco-voip mailing list
> > > > > cisco-voip at puck.nether.net
> > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > >
> > > >
> > >
> >
>