[cisco-voip] Analog conf phone off of VG224, meetme?

[Kris Seraphine]

I'm pretty sure the **7 for meet me and **5 for park are errors in the
documentation.  When debugging voip application stcapp events I don't see
any indication that the gateway sees those patterns as a feature code as it
does with, say **4 where I see:

 Sending dcDeviceSoftKeyEvent(GroupCallPickUp: event=18) for device id: 43,
call_ref: 60628229

right after the 4 is pressed.  Even dialing **6 throws an errors saying the
feature isn't support in CallManager.

I'm not sure how they'd implement park on an analog phone anyway

On Dec 15, 2007 12:23 PM, Jonathan Charles <jonvoip at gmail.com> wrote:

> Ok, loaded 12.4.15T1.... but I only get these codes:
>
> SGF-VG224#sh stcapp feature codes
>
>  stcapp feature access-code
>    prefix **
>    call forward all **1
>    call forward cancel **2
>    pickup local group **3
>    pickup different group **4
>    pickup direct **6
>
>  stcapp feature speed-dial disabled
>
>  stcapp call-control mode is feature mode
>    #1 -- hangup last active call
>    #2 -- transfer
>    #3 -- conference
>    #4 -- drop last conferee
>    #5 -- toggle between two calls
>
> SGF-VG224#
>
> So, the question is, where is Meetme?
>
> This link says I should get everything:
>
>
> http://ciscosystems.com/univercd/cc/td/doc/product/software/ios124/124newft/124limit/124x/124xe6/htfeatmd.htm
>
>
>
> Jonathan
>
> On Dec 15, 2007 11:42 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > Yeah, I think I need to load a T train code...
> >
> >
> >
> > J
> >
> >
> > On Dec 15, 2007 10:28 AM, Justin Steinberg <jsteinberg at gmail.com> wrote:
> > > hookflash works in 12.4(9)T +
> > >
> > > docs on CCO indicate that 12.4(15)T supports meetme initiation via
> > > feature code **7 but the details aren't clear and i've not personally
> > > tried it myself.
> > >
> > >
> > > On Dec 14, 2007 7:43 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > > ...and it didn't work...
> > > >
> > > >
> > > > On Dec 14, 2007 6:43 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > > > I tried it, set max calls to 2, and reset, VG224 is running
> 12.4.17a
> > > > >
> > > > >
> > > > > Jonathan
> > > > >
> > > > >
> > > > > On Dec 14, 2007 5:04 PM, Justin Steinberg <jsteinberg at gmail.com>
> wrote:
> > > > > > flash (hookflash) works with VG224 on sccp ports.  Ensure that
> you
> > > > > > have max calls >1 on the CM and that you have vg224 IOS code
> that
> > > > > > supports this feature.
> > > > > >
> > > > > >
> > > > > > On Dec 14, 2007 5:48 PM, Jonathan Charles <jonvoip at gmail.com>
> wrote:
> > > > > > > It sounds like a very basic feature that should already be
> there...
> > > > > > >
> > > > > > > Flash doesn't even work...
> > > > > > >
> > > > > > > What, exactly is the VG224 useful for again?
> > > > > > >
> > > > > > >
> > > > > > > Weird thing is that all of these features work with CME...
> > > > > > >
> > > > > > > wow.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Jonathan
> > > > > > >
> > > > > > >
> > > > > > > On Dec 14, 2007 4:45 PM, Wes Sisk <wsisk at cisco.com> wrote:
> > > > > > > > Honestly, it's not like Park where we have to provide visual
> feedback.
> > > > > > > > Sounds like a great question for Cisco account team.
> > > > > > > >
> > > > > > > > /Wes
> > > > > > > >
> > > > > > > >
> > > > > > > > Jonathan Charles wrote:
> > > > > > > > > Dumb question, but... why?
> > > > > > > > >
> > > > > > > > > I run into this all the time... customers have analog
> Polycoms and buy
> > > > > > > > > VG224s to use them... and can't.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Jonathan
> > > > > > > > >
> > > > > > > > > On Dec 14, 2007 4:03 PM, Wes Sisk <wsisk at cisco.com> wrote:
> > > > > > > > >
> > > > > > > > >> Not possible to initiate meetme from analog endpoint
> AFAIK.  Even the
> > > > > > > > >> vg248 which had the most extensive SCCP feature
> integration did not do
> > > > > > > > >> meetme.
> > > > > > > > >>
> http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_guide_chapter09186a0080087dd8.html#50106
> > > > > > > > >>
> > > > > > > > >> /Wes
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> Jonathan Charles wrote:
> > > > > > > > >>
> > > > > > > > >>> How do I get MeetMe to work from an analog conference
> phone that is
> > > > > > > > >>> plugged into a VG224? The Conf phone needs to initiate
> the conference.
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > > >>> Jonathan
> > > > > > > > >>> _______________________________________________
> > > > > > > > >>> cisco-voip mailing list
> > > > > > > > >>> cisco-voip at puck.nether.net
> > > > > > > > >>> https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > > > > >>>
> > > > > > > > >>>
> > > > > > > >
> > > > > > > _______________________________________________
> > > > > > > cisco-voip mailing list
> > > > > > > cisco-voip at puck.nether.net
> > > > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071217/4efddfcd/attachment.html