[cisco-voip] Group Speed dials

[Curt Shaffer]

Thanks for the suggestion. I have been finding a lot of material on a
speeddial.xml but the information I am coming across is not clear of where
these entries show up. It appears as if they show up in the Local Directory
but isn't that where the directory of added users show up? 
-----Original Message-----
From: Paul Choi [mailto:asobihoudai at yahoo.com] 
Sent: Wednesday, December 19, 2007 11:55 PM
To: Curt Shaffer; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Group Speed dials

Curt,

The directory that is updated either through placing
them underneath telephony-service or using the GUI can
be dialed using the fast-dial softkey that appears
when you press a digit sequence that corresponds to a
directory entry. This is my understanding of how it
works anyway.

Paul

--- Curt Shaffer <cshaffer at gmail.com> wrote:

> I have a client running CME 4.x. They are inquiring
> about a group speed dial
> option that can be updated in one place and pushed
> to all of the phones. I
> thought directories may be the way but I can't find
> a speed dial option. Can
> anyone point me in a good direction for this?
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



 
____________________________________________________________________________
________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.
http://tools.search.yahoo.com/newsearch/category.php?category=shopping