[cisco-voip] MWI message light question

[dschulz]

 Thanks, Pat.  I also noted the server-wide configuration for the same item
that you pointed out on the Advanced Settings in the Tools Depot.  I
appreciate the help!


Dave 
 

-----Original Message-----
From: Pat Hayes [mailto:pat-cv at wcyv.com] 
Sent: Thursday, December 20, 2007 7:04 PM
To: dschulz
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MWI message light question

In SAWeb, on the Conversation tab for the user, check 'Mark a message as
saved upon hangup or disconnection'.

-------- Original Message  --------
From: "dschulz" <dschulz at skyline-ats.com>
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MWI message light question
Date: 12/20/2007 3:24 PM

> The default in Unity is set that a subscriber must listen to the 
> message in it's entirety, before the MWI light is turned off.  Meaning 
> if they only "partially" listen to the message and hang up, the MWI 
> light remains lit.  Is there anyway to change this (to make MWI turn 
> off on messages being partially listened to)?
>  
> Dave
>  
>  
> 
> 
> ----------------------------------------------------------------------
> --
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip