[cisco-voip] configuring eight FXO ports as a trunkgroup

[Jonathan Charles]

No, the trunk-group command is definitely the way to go, especially if
you don't want to create 50 dial peers...

And I am not aware of a max, I have done it with 16 ports before...



Jonathan

On Dec 26, 2007 5:39 PM, Paul Choi <asobihoudai at yahoo.com> wrote:
> I am going to be installing eight phone lines into FXO
> ports for a CCME/CUE installation and was wondering
> what is the maximum number of voice ports you can
> place in a trunk group?
>
> Am I making this setup more complicated than needed/is
> there an easier way of grouping these lines together
> to be manipulated as a single logical entity?
>
> Paul
>
>
>       ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>