[cisco-voip] Reorder mute button on 7920 in CME

[Paul Choi]

You should be able to do this with ephone-templates. Ephone-templates let you restrict what softkeys appear on phones.

Paul

----- Original Message ----
From: Anthony Kouloglou <akoul at dataways.gr>
To: "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
Sent: Friday, December 28, 2007 5:06:0-1 AM
Subject: [cisco-voip] Reorder mute button on 7920 in CME

Hi,
i am running a CME 4.0(2) and some 7920s.
Is it possible to configure it so in connected state, only end call and
 
transfer appears?
Can this be done with an upgrade of the CME or the phones image?

Regards
Antonis
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ