[cisco-voip] SCCP Firmware 8.0(3)

[Jonathan Charles]

Been using it clean for awhile... I see that 8.2(1) is out... However, I
have found that if everything is working, it is best to leave it alone...



Jonathan

On 1/4/07, Carter, Bill <bcarter at sentinel.com> wrote:
>
>  What's the word on 8.0(3) for 7941 and 7961.
>
> **
> *Bill Carter*
> Sr. Business Communications Analyst
> Sentinel Technologies
> (O) 217.391.5015
>
>
> This email may contain proprietary and confidential information for the sole use of the intended recipient.
> Any review, retransmission, dissemination, or other use of this information by persons or entities other than
> the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and
> delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the
> opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070104/f1811b26/attachment.html