[cisco-voip] Speed dial and variable length route pattern

[Jozef Janitor]

Thank you very much Scott!

 It's working :)

 

Jozef

 

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Thursday, January 04, 2007 5:00 PM
To: Jozef Janitor; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Speed dial and variable length route pattern

 

Inter digit time out.  Can you change your Route pattern or add one that is
00.!# and make your speed dial end with a # and see if that works.

 

Scott

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jozef Janitor
Sent: Thursday, January 04, 2007 6:19 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Speed dial and variable length route pattern

 

Hi,

 

I am using CCM 4.0 and I have assigned some speed dials to IP Phones.
Unfortunately speed dials that should by matched by a route pattern with
variable length are not working :(

For example:

 

I have a route pattern 00.! that match dialed number 00123456789 if I just
normally dial it. But it doesn't work for a speed dial. If I rewrite the
pattern with 00XXXXXXXXX then it works.

Do you know any workaround for that? And why is it not working?

 

Thank you.

 

All the best,

   Jozef Janitor

   www.cnl.tuke.sk

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070104/265c7c47/attachment.html