[cisco-voip] CCM shared line like in CME

[Lelio Fulgenzi]

I don't think there is a native feature for this, but you could use translations and or CTI route points forwarded to the 'real' line. Each has there advantages and behaviours. If you are migrating from CME to CCM then you might notice some differences.

What do you see on the phone?

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Jozef Janitor 
  To: cisco-voip at puck.nether.net 
  Sent: Thursday, January 04, 2007 2:56 PM
  Subject: [cisco-voip] CCM shared line like in CME


  Hi,

   

  Is it possible to configure the "big" CCM (4.x) to have a shared line feature assigned to a button?

  I am creating these shared lines on CME this way:

   

  ephone-dn 1

   number 1000

  ephone-dn 2

   number 1001

  ephone 1

   mac-address 1234.5678.1234

   type 7940

   button 1o1,2

   

  But in CCM configuration I can't see a possibility to assign another DN to a line. 

  Do you have any suggestion please?

   

  Thank you.

   

  Best regards,

     Jozef Janitor

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070104/5837e881/attachment.html