[cisco-voip] IP Communicator and MS RDP

[Jason Aarons (US)]

I haven't personally tried it with Communicator 2.X, but 1.x it did not
work. The 2.x release notes cite CSCeb55414 is a open caveat. The
release notes of 1.x state Communicator is not supported under Terminal
Services.

I want to say I've seen customers use Communicator 2.x under Citrix but
maybe I'm daydreaming..

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Charles
Tompkins
Sent: Friday, January 05, 2007 5:01 PM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] IP Communicator and MS RDP

Greets!
Has anyone run the IP Communicator softphone from a MS terminal server
over
RDP to multiple users?

Ideally, this would be setup with the terminal server on the network and
the
multiple users would connect to the server using MS RDP from their
desktops
or thin clients distributed across the LAN .  USB headsets being used at
the
users' desk on the RDP client machines...

Thanks,
-Charles

------------
Master timed out!  Holding election...
I am declaring myself the master! 





CONFIDENTIAL NOTICE: This email including any attachments, contains 
confidential information belonging to the sender. It may also be 
privileged or otherwise protected by work product immunity or other 
legal rules. This information is intended only for the use of the 
individual or entity named above.  If you are not the intended 
recipient, you are hereby notified that any disclosure, copying, 
distribution or the taking of any action in reliance on the contents 
of this emailed information is strictly prohibited.  If you have 
received this email in error, please immediately notify us by 
reply email of the error and then delete this email immediately.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.