[cisco-voip] ATA Extended Dialtone Issue?

[Lelio Fulgenzi]

I think you said it "...nothing known has changed..."  ;)

I'd try getting a new ATA and putting it's MAC addres into the config. If the same thing happens, it's a config issue. If not, it's an ATA issue.

That's what I would do.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
I'm changing my name to iPhone. Who do I pay trademark rights to?
  ----- Original Message ----- 
  From: Dane 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, January 10, 2007 4:51 PM
  Subject: [cisco-voip] ATA Extended Dialtone Issue?


  I have an ATA that has apparently decided to stop working.  Fax machine is hooked up to it, and when it picks up and starts dialing digits you hear the dialtone and well the dialtone does not go away.  It is unable to place calls now. 

  I have tried power cycling it.  I have tried resetting it via CM.  But so far nothing.  Since nothing known has changed in CM or the network, I have to wonder if it is simply hardware failure.

  Any ideas or suggestions?




------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070110/9a76f629/attachment-0001.html