[cisco-voip] Unity Failover same L2?

[Stu Packett]

They can be on separate VLANS.  I actually have my secondary across the WAN
on a different subnet via a DS3 connection.  It was documented on Cisco that
I can do this, but they have removed that documentation since then.

On 1/9/07, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>  For Unity 4.1(2) do the servers FailoverConfig.exe need to be on the same
> L2 network, or can they on separate vlans on the same 6509?
>
>
>
> The requirements don't say anything about same L2.
>
>
> http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_feature_guide_chapter09186a00801b9253.html#wp1142309
>
>
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070110/f1e01163/attachment.html