[cisco-voip] OT: IOS switchport commands on CATOS ?

[Dane]

I am trying to confirm the equivalent CATOS commands for the following
switchport IOS commands:


int gig3/3 (trusted)
switchport
switchport trunk encap dot1q
switchport mode trunk
switchport trunk native vlan 998
switchport trunk allowed vlan 10,15,30



I believe most of this can or would be accomplished with the following
CATOS command:

set trunk 3/3 on 998 dot1q

However I am unsure about the switchport trunk allowed line.

I found the following CATOS <--> IOS command page on cisco.com

http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_white_paper09186a00800c8441.shtml

But would really like to get a confirmation from others about this.

Regards and Thanks,
Dane

P.S.  Anyone aware of a better / preferred mailing list for this sort
of topic?  Hate being off topic and possibly bothering others.