[cisco-voip] H.323 Ploycom Video Conf Unit to call CCM and 7985

[Philip Walenta]

No software is needed to take a Polycom H.323 endpoint and make it talk to
CallManager.

You can provision gatekeeper and register CallManager and your Polycom
devices or you can define your Polycom devices as H.323 devices within
CallManager.  

I prefer to use gatekeeper because it supports the actual endpoint
registration, and you'll have a good spot to manage your Polycom and other
H.323 endpoints whereas CallManager never shows an H.323 device as
registered.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Leetun, Rob
Sent: Tuesday, January 16, 2007 8:03 AM
To: c3voip at nc.rr.com; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] H.323 Ploycom Video Conf Unit to call CCM and 7985

Hi,

You need to install the software for the polycom on the CCM and build it as
a device.  Then you can call it.

R 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of c3voip at nc.rr.com
Sent: Monday, January 15, 2007 11:07 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] H.323 Ploycom Video Conf Unit to call CCM and 7985

Hi,

I have a couple 7985's to play with and I also have some H.323 Polycom video
conferencing units that we use in our conference rooms.  I have a gatekeeper
configured and can make calls to one of these H.323 VC units, but I can't
call back.  How would I configure the unit, gatekeeper and CCM to allow
calls back to a 7985 on the CCM?

Thanks,
-C
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip