[cisco-voip] CCM "provide out-side dial tone" problem

[Alan Su]

Dear Mike,

It works now! The reason of why I can't hear dial tone is because some how
it doesn't work on SoftPhone. When I tried IP Phone, I can hear dial tone.
Thanks a lot~

Regards,
Alan


2007/1/19, Mike Lay (milay) <milay at cisco.com>:
>
>  Is your pattern "9", "9.@" or some other pattern. If it makes an
> immediate match it is going to send right away, no delay for the tone. The
> only time would see tone is if it is configured properly & if CCM were
> waiting on more digits.
>
> Mike
>
>  ------------------------------
> *From:* Alan Su [mailto:cj.alan at gmail.com]
> *Sent:* Thursday, January 18, 2007 10:04 AM
> *To:* Mike Lay (milay)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CCM "provide out-side dial tone" problem
>
>
>  Dear Mike,
>
> Thanks a lot for the guide, but after checking all the DNs, patterns,
> meet-me number... etc., there is no overlap. But after I dialed "9", CCM
> seems forward it to gateway directly instead of providing the dial tone. Is
> there any other configuration I need to double verify? Many thanks for your
> kind help.
>
> Regards,
> Alan
>
>
> 2007/1/18, Mike Lay (milay) <milay at cisco.com>:
> >
> >
> > http://www.cisco.com/en/US/products/hw/phones/ps379/products_qanda_item09186a00800a6763.shtml#q13
> >
> > Mike
> >
> >  ------------------------------
> > *From:* cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net]
> > *On Behalf Of *Alan Su
> > *Sent:* Wednesday, January 17, 2007 10:20 AM
> > *To:* cisco-voip at puck.nether.net
> > *Subject:* [cisco-voip] CCM "provide out-side dial tone" problem
> >
> >
> >  Dear All,
> >
> > I have a route pattern "9" in CCM 4.02 which pointing to a voice
> > gateway, the voice gateway have severial dial-peers with destination pattern
> > begging with 9 (such as 91315T, 91206T... etc). What I tried to do is when
> > user dial "9", he/she can hear a dial tone from CCM and then he/she can dial
> > the following digits(ex: 13153824604) and gateway will pick the matched
> > dial-peer to send the digits to remote site voice gateway and then to PSTN
> > for toll saving. I already check the "provide outside dial tone" in route
> > pattern, but there is no dial tone provided after dialing "9". What else
> > configuration I need to do in CCM or in voice gateway? Any comments will be
> > truely grateful. Thanks a lot.
> >
> > Regards,
> > Alan
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070119/7d367610/attachment.html