[cisco-voip] memory and srst

[Lelio Fulgenzi]

Yup. Read that. What concerns me is there little footnote underneat their spec boxes. It says for the 3825 i need 256 memory with 64 flash, but then the footnote says:
  Memory recommendations and maximum numbers of IP phones are for common Cisco SRST configurations only. Systems with large numbers of phones and complex configurations may not work on all platforms and can require additional memory or a higher performance platform. 

I'm just concerned if I want to use the full load if 256 is enough.
  ----- Original Message ----- 
  From: Paul Choi 
  To: cisco-voip at puck.nether.net 
  Sent: Sunday, January 28, 2007 2:55 PM
  Subject: Re: [cisco-voip] memory and srst



  --- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

  > does a router in SRST mode consume more memory? i
  > can't find a memory calculator to help me find out
  > how much memory i need if i'm running X number of
  > phones in SRST. i want to make sure i have enough
  > without buying too much. ;)

  Yes it does depending on the number of devices you
  want to register with it when CCM is taking a dump.

  http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_documentation_roadmap09186a008018912f.html

  Please reference the URL above to see how much memory
  you will need to install in your box.




   
  ____________________________________________________________________________________
  Finding fabulous fares is fun.  
  Let Yahoo! FareChase search your favorite travel sites to find flight and hotel bargains.
  http://farechase.yahoo.com/promo-generic-14795097
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070128/516aecc0/attachment-0001.html