[cisco-voip] memory and srst

[Lelio Fulgenzi]

Exactly my point, I'm looking to register at least 300 of them, possibly more. 

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
I'm changing my name to iPhone. Who do I pay trademark rights to?

  ----- Original Message ----- 
  From: Paul Choi 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, January 29, 2007 9:19 AM
  Subject: Re: [cisco-voip] memory and srst



  --- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

  > Yup. Read that. What concerns me is there little
  > footnote underneat their spec boxes. It says for the
  > 3825 i need 256 memory with 64 flash, but then the
  > footnote says:
  >   Memory recommendations and maximum numbers of IP
  > phones are for common Cisco SRST configurations
  > only. Systems with large numbers of phones and
  > complex configurations may not work on all platforms
  > and can require additional memory or a higher
  > performance platform. 
  > 
  > I'm just concerned if I want to use the full load if
  > 256 is enough.

  I would surmise that so long as you're not trying to
  do something off-the-wall such as register 480 SCCP IP
  phones on your 3825, the standard recommended memory
  and flash should suffice.



   
  ____________________________________________________________________________________
  Need Mail bonding?
  Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
  http://answers.yahoo.com/dir/?link=list&sid=396546091
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070129/b436e48b/attachment.html