[cisco-voip] PreDot digit strip on route detail stops working

[Erick Bergquist]

Hi, 

Anyone ever seen where predot digit strip on the route detail level appears to stop working? The route pattern doesn't have any stripping set, but did that as a workaround for now. The route list for the route pattern has 6 route groups in it, each with a single 6608 T1 PRI endpoint, and it appears when the first route group is full and it rolls to second route group in the route list is when this happens. I made a test route list with each route group in it (one at a time) and the calls go out each fine when it doesn't roll to the next route group in the route list. 

Sample route pattern is a 9.1800XXXXXXX and it works and goes out fine, until it rolls to second route group and then it goes out to PSTN with 9 on it. All the route details have predot set to on. I had updated them all and the route pattern to and reset , and same thing. 

This is on a CCM 4.0(2a)sr2 system. I found some close bug matches but they were for route pattern level. 

Erick



 
____________________________________________________________________________________
Bored stiff? Loosen up... 
Download and play hundreds of games for free on Yahoo! Games.
http://games.yahoo.com/games/front