[cisco-voip] Configuring E1 in Switzerland

[Patrick Diener]

don't know what's used in the UK but in Switzerland we use

framing: CRC4
linecode: HDB3
(should be the default on E1 VICs)
isdn switch-type primary-net5


On 1/31/07, Nesen Kisten (ZA) <Nesen.Kisten at za.didata.com> wrote:
>
>
>
>
> Hi All,
>
>
>
> Is there any difference with configuration of E1 in Switzerland as opposed
> to the UK ?
>
>
>
> Regards
>
>
>
> Nesen
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>