[cisco-voip] voice gateway - trace a call

[kevin k]

i am seeing only "debug" so far.  so is there any regular and safe "show"
command?  it would be very cool if so.

On 1/31/07, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>  Debug isdn q931 will give you a lot of information for this kind of
> problem.
>
>
>
> Scott
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *kevin k
> *Sent:* Wednesday, January 31, 2007 6:30 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] voice gateway - trace a call
>
>
>
> i am fairly new on voip.  but reading to get better.
>
>
>
> i have user complaining that they get busy signal but only a few (less
> thatn 10) are on the phone.  they have a pri line.  so this is what i did to
> trouble shoot.
>
>
>
> i associate myself to their partition and css.
>
> the gateway is in the same same partition.
>
> i make a call and execute "show voice port summary"
>
>
>
> is there any way i can see which line i am using?  even debug but i want
> to stay away from debug.
>
>
>
>
>
> thanks
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070131/20aa2ba6/attachment.html