[cisco-voip] Configuring E1 in Switzerland

[George Scott]

This depends on the electrical interface provided by the telco.  The new
circuits are coming in with G.703 signaling.  This means the framing will be
UNFRAMED.

Your config would look like

Controller E1 0/0/0
Channel-group 0 unframed
Vice the default CRC4

Geo


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco-voip-request at puck.nether.net
Sent: Wednesday, January 31, 2007 4:41 AM
To: cisco-voip at puck.nether.net
Subject: cisco-voip Digest, Vol 47, Issue 183



Message: 4
Date: Wed, 31 Jan 2007 11:06:01 +0100
From: "Patrick Diener" <patrick.diener at gmail.com>
Subject: Re: [cisco-voip] Configuring E1 in Switzerland
To: cisco-voip at puck.nether.net
Message-ID:
	<c0deb5b80701310206p2274016du71b4aa485f3d45b8 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

don't know what's used in the UK but in Switzerland we use

framing: CRC4
linecode: HDB3
(should be the default on E1 VICs)
isdn switch-type primary-net5


On 1/31/07, Nesen Kisten (ZA) <Nesen.Kisten at za.didata.com> wrote:
>
>
>
>
> Hi All,
>
>
>
> Is there any difference with configuration of E1 in Switzerland as opposed
> to the UK ?
>
>
>
> Regards
>
>
>
> Nesen
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>