[cisco-voip] Avaya Feature: InternalAutoAnswer

[Lelio Fulgenzi]

Since autoanswer is configured on the line, set up the primary line to be forward all internal to the secondary line and enable autoanswer on the second line.

Still needs two lines though.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Robert Kulagowski 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, January 31, 2007 2:38 PM
  Subject: [cisco-voip] Avaya Feature: InternalAutoAnswer


  Apparently Avaya has a toggle feature you can put on a phone; when 
  enabled, an internal call will be automatically picked up to 
  speakerphone; external calls will ring, then go to VM.

  One of my sites uses this feature and likes it.  Any comparable way to 
  do this on CM?  I don't think there's anything out of the box that would 
  allow a user to turn this on/off from their phone, and to be granular 
  enough for internal vs. external calls.

  CM 4.1.3sr2
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070131/59cce5a7/attachment.html