[cisco-voip] Lack of DSP resources?

[Matt Slaga (US)]

You may need to adjust your codec complexity.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wydra, Jason
Sent: Wednesday, January 31, 2007 12:26 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Lack of DSP resources?

If I have a PVDM2-48 and I'm setting up 2 PRIs for 24 channels, why on
the second PRI when I run the pri-group timeslots command it tells me I
don't have enough resources and I can only configure 24 channels?
 
Thanks,
Jason

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.