[cisco-voip] Avaya Feature: InternalAutoAnswer

[Kris Seraphine]

I've had this request from many customers. One was very insistent and I
ended up assigning each user two extensions.  Line 1 was an auto answer
extension that internal users would dial and line two was a normal extension
that direct dial calls would ring.  If users wanted to disable the auto
answer they would CFA the first line to the second line.

It worked but I wouldn't recommend it unless the customer demanded it.

On 1/31/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>  definately. if you are using unity as AA it won't work.
>
> besides, as Rob mentioned there are no seperate cFwdAll settings, so it
> won't work at all. :(
>
>
>
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> ...there's no such thing as a bad timbit...
>
> ----- Original Message -----
> *From:* Kris Seraphine <baryonyx5 at gmail.com>
> *To:* Lelio Fulgenzi <lelio at uoguelph.ca>
> *Cc:* Robert Kulagowski <bob at smalltime.com> ; cisco-voip at puck.nether.net
> *Sent:* Wednesday, January 31, 2007 3:06 PM
> *Subject:* Re: [cisco-voip] Avaya Feature: InternalAutoAnswer
>
> I think you have to be careful with something like this though.  If an
> external caller calls into Unity and gets transferred to your extension I'm
> pretty sure it will appear to callmanager as an internal call.
>
> On 1/31/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> >
> >  Since autoanswer is configured on the line, set up the primary line to
> > be forward all internal to the secondary line and enable autoanswer on the
> > second line.
> >
> > Still needs two lines though.
> >
> > --------------------------------------------------------------------------------
> > Lelio Fulgenzi, B.A.
> > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > ...there's no such thing as a bad timbit...
> >
> > ----- Original Message -----
> > *From:* Robert Kulagowski <bob at smalltime.com>
> > *To:* cisco-voip at puck.nether.net
> > *Sent:* Wednesday, January 31, 2007 2:38 PM
> > *Subject:* [cisco-voip] Avaya Feature: InternalAutoAnswer
> >
> > Apparently Avaya has a toggle feature you can put on a phone; when
> > enabled, an internal call will be automatically picked up to
> > speakerphone; external calls will ring, then go to VM.
> >
> > One of my sites uses this feature and likes it.  Any comparable way to
> > do this on CM?  I don't think there's anything out of the box that would
> >
> > allow a user to turn this on/off from their phone, and to be granular
> > enough for internal vs. external calls.
> >
> > CM 4.1.3sr2
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
> --
> kris seraphine
>
>


-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070131/5815f213/attachment-0001.html