[cisco-voip] dtmf-relay in IOS dial-peer

[Jason Aarons (US)]

What happens when someone configures a dial-peer with all 3 methods to
CVP (Cisco Voice Portal) 3.1?

 

Does it send dtmf 3 times, once each in each format? Someone else
configured this and I'm reverse engineering what they did.

 

 

Example;

dial-peer voice 28800 voip

 description CCMSubscriber2

 destination-pattern 28[89]..

 session target ipv4:10.60.10.11

 dtmf-relay rtp-nte h245-signal h245-alphanumeric

 codec g711ulaw

 no vad

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070722/f770096e/attachment.html