[cisco-voip] Seggregation of Pri for inbound and outbound dialing..

[Lelio Fulgenzi]

Have you asked your service provider? I know that our PRIs can be configured with X number of inbound calls and Y number of outbound calls.
  ----- Original Message ----- 
  From: Mudassar.Khalid/NE/Lahore 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, July 31, 2007 4:54 AM
  Subject: [cisco-voip] Seggregation of Pri for inbound and outbound dialing..


  Hi all,
  I want to segregate PRI in such way that i could use channel 1 to 10 for inbound calls and 11 to 21 for outbound calls.Can anyone tell me about the possibility of this scenario and if yes then how it would be possible?(A guidline for configuration)

  Kind Regards,
  Mudassar Khalid
  Network support Engineer
  O&M Lahore NEPL
  Cell : (0092) 0322-4481004


------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070731/8ecab671/attachment.html