[cisco-voip] Block incoming call based on their CallerID?

[CarlosOrtiz at bayviewfinancial.com]

We should change your name to Lelio "iwanttoforwardsecondarylines" 
Fulgenzi.   What the hell is that CIPTUG FAC doing for you anyway!  You 
have been to the last 3 events , even spoke last year.  They should have 
taken care of this already!  ;)




"Lelio Fulgenzi" <lelio at uoguelph.ca> 
Sent by: cisco-voip-bounces at puck.nether.net
06/07/2007 02:21 PM

To
"Paul Choi" <asobihoudai at yahoo.com>, <cisco-voip at puck.nether.net>
cc

Subject
Re: [cisco-voip] Block incoming call based on their CallerID?






it would be more like
 
voice translation-rule 1
    rule 1 reject /9005559292/
 
voice translation profile iwanttoforwardsecondarylines
    translate calling rule 1
 
dial-peer voice pots 1
    translation-profile incoming iwanttoforwardsecondarylines
 
 
 
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo." WJR
----- Original Message ----- 
From: Paul Choi 
To: cisco-voip at puck.nether.net 
Sent: Thursday, June 07, 2007 2:11 PM
Subject: Re: [cisco-voip] Block incoming call based on their CallerID?

Scott,

Could you please give an example of this? Say you were
trying to block 19005559292 on the incoming GW...

voice translation-rule 1
 rule 1 9005559292

voice translation profile...

uhhh...I'm lost here without my GWGK book...

dial-peer voice pots 1
voice t


--- "Voll, Scott" <Scott.Voll at wesd.org> wrote:

> Only if you are using a H323 VGW.  Then it's a
> matter of working your
> translation rules.
> 
> 
> 
> Scott
> 
> 
> 
> ________________________________
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Corbett Enders
> Sent: Thursday, June 07, 2007 9:11 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Block incoming call based on
> their CallerID?
> 
> 
> 
> Can we block a call coming into our phone system
> (CM4.2) based on the
> source caller ID?  Any way of sending them to a fast
> busy signal instead
> of having the call ring our switchboard?
> 
> 
> 
> Corbett Enders
> 
> Business Development
> Homes by Avi Inc.
> Tel: (403) 536-7170
> Fax: (403) 536-7171
> Email: cenders at homesbyavi.com
> <mailto:cenders at homesbyavi.com> 
> www.homesbyavi.com <http://www.homesbyavi.com> 
> 
> 
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



 
____________________________________________________________________________________
TV dinner still cooling? 
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070607/62a940e0/attachment.html