[cisco-voip] CME shared ephone-dn question

[Paul Choi]

ephone-dn  105  dual-line
 number 1567
 pickup-group 1
 label 1567
 description Main Number
 call-forward noan 7000 timeout 20
 huntstop channel
 no huntstop
 hold-alert 30 originator

ephone-dn  71  dual-line
 number 1567 
 pickup-group 1
 label 1567
 description Main Number
 preference 1
 call-forward noan 7000 timeout 20
 huntstop channel
 hold-alert 30 originator

ephone-dn  72  dual-line
 number 1567
 pickup-group 1
 label 1567
 description Main Number
 preference 2
 call-forward busy 7000
 call-forward noan 7000 timeout 20
 huntstop channel
 hold-alert 30 originator

ephone  7
 device-security-mode none
 mac-address ffff.ffff.ffff
 type 7960 addon 1 7914
 keep-conference local-only
 button  1:8 2o105,71,72 3:107 4:3

Do it like this Jeff. Make multiple DNs of the same
number and assign those to phones.

Paul

--- "Jeff Anderson (Enventis)"
<janderson at enventis.com> wrote:

> One more requirement:
> 
> They want the lines to be shared so calls can be
> picked up on other
> phones without transferring or putting them on park.
> 
> Thanks,
> 
> -----Original Message-----
> From: Jonathan Charles [mailto:jonvoip at gmail.com] 
> Sent: Thursday, June 07, 2007 5:33 PM
> To: Jeff Anderson (Enventis)
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] CME shared ephone-dn
> question
> 
> Change the button commands to:
> 
> button 1o1,2
> 
> This way 1000 will ring both phones.and the third
> call will go to the
> call-forward busy location.
> 
> 
> 
> 
> Jonathan
> 
> On 6/7/07, Jeff Anderson (Enventis)
> <janderson at enventis.com> wrote:
> > I want to configure the following setup. Two
> shared lines on two
> > different buttons. Each ephone-dn accepts one
> inbound call supporting
> a
> > total of two calls. When the third call comes in I
> want it to go to
> VM.
> >
> > This is what I have:
> >
> > ephone-dn 1 dual-line
> >         number 1000
> >         label Main Line 1
> >         Preference 1
> >         huntstop-channel
> >         call-forward busy 2098
> >         call-forward noan 2098 timeout 18
> >         no huntstop
> >
> > ephone-dn 2 dual-line
> >         number 1000
> >         label Maine Line 2
> >         preference 2
> >         huntstop-channel
> >         call-forward busy 2098
> >         call-forward noan 2098 timeout 18
> >
> > Ephone 1
> > Button 1:1 2:2
> >
> > Ephone 2
> > Button 1:1 2:2
> >
> > 2098 is VM pilot.
> >
> >
> > In the above scenario that call only rings in on
> one ephone-dn and
> goes
> > to VM. If I setup ephone-dn 1 to call-forward busy
> to 1000 it rings
> busy
> > on the third call.
> >
> > Can someone please send me a configuration example
> of what I am trying
> > to accomplish.
> >
> > Thanks
> >
> > Jeff
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



       
____________________________________________________________________________________
Choose the right car based on your needs.  Check out Yahoo! Autos new Car Finder tool.
http://autos.yahoo.com/carfinder/