[cisco-voip] seting network user side and bottom up for T1 during SRST mode

Lelio Fulgenzi lelio at uoguelph.ca
Fri Jun 8 09:43:12 EDT 2007


Cool, thanks Zoltan.

Do you know of what "show" command I can use to confirm this?

I tried show isdn service serial 0/0/0:23 but it doesn't show me all that.

I guess I can look it up in the voice command reference and see what the default is.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Kelemen Zoltan 
  To: Lelio Fulgenzi 
  Cc: cisco-voip at puck.nether.net 
  Sent: Friday, June 08, 2007 9:57 AM
  Subject: Re: [cisco-voip] seting network user side and bottom up for T1 during SRST mode


  What I have seen so far are E1 controllers, mostly with ISDN PRI 
  signaling on them, and in that case it's something like
  (config)#int  Ser 0/0:15
  (config-if)#isdn bchan-number-order ascending
  (config-if)#isdn protocol-emulate user
  on a T1 you probably have a different naming for your serial interface, 
  but you get the point.

  However, I think both of these settings are the default values anyway, 
  so that might be the cause, you don't see them in the config.

  And back to the original question, I think I'd set up whatever I'd need 
  manually (if it's the same as the mgcp config it won't conflict anyway) 
  just in case the router couldn't get a config in SRST mode... somebody 
  correct me if I'm wrong :-)

  regards,
    Zoltan

  Lelio Fulgenzi wrote:
  > re: seting network user side and bottom up for T1 during SRST mode
  >  
  > I don't see how to do this.
  >  
  > I would have thought that the ccm-manager config statement would bring 
  > this sort of information down to the controller, but I don't see it. I 
  > checked the voice command reference, but still didn't see anything.
  >  
  >  
  >  
  > --------------------------------------------------------------------------------
  > Lelio Fulgenzi, B.A.
  > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  > "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo 
  > buffalo."      WJR
  > ------------------------------------------------------------------------
  >
  > _______________________________________________
  > cisco-voip mailing list
  > cisco-voip at puck.nether.net
  > https://puck.nether.net/mailman/listinfo/cisco-voip
  >   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070608/de850090/attachment.html 


More information about the cisco-voip mailing list