[cisco-voip] CME ISDN Voice Problem
Paul Choi
asobihoudai at yahoo.com
Sun Jun 10 07:28:22 EDT 2007
How did you fix it?
Paul
--- "May, Simon" <Simon.May at ihs.com> wrote:
> I've fixed this, so please ignore.
>
>
>
> Sinon
>
>
>
> ________________________________
>
> From: May, Simon
> Sent: 10 June 2007 05:33
> To: 'cisco-voip at puck.nether.net'
> Subject: CME ISDN Voice Problem
>
>
>
> The following is a Q.931 debug of a failed incoming
> call ... any ideas
> why it is failing, and any resolution?
>
> Why is the called party converted from 920 to 20?
>
>
>
>
>
> Jun 9 12:07:09.580: ISDN Se0/0/0:23 Q931: RX <-
> SETUP pd = 8 callref =
> 0x1C4E
>
> Bearer Capability i = 0x8090A2
>
> Standard = CCITT
>
> Transfer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Facility i = 0x9F8B0100A10802012A0201008400
>
> Calling Party Number i = 0x1180,
> '447980788157'
>
> Plan:ISDN, Type:International
>
> Called Party Number i = 0x80, '920'
>
> Plan:Unknown, Type:Unknown
>
> Jun 9 12:07:09.600: ISDN Se0/0/0:23 Q931:
> pak_private_number: Invalid
> type/plan 0x0 0x0 may be overriden; sw-type 3
>
> Jun 9 12:07:09.600: ISDN Se0/0/0:23 Q931: Applying
> typeplan for sw-type
> 0x3 is 0x2 0x1, Called num
>
> Jun 9 12:07:09.600: ISDN Se0/0/0:23 Q931: TX ->
> CALL_PROC pd = 8
> callref = 0x9C4E
>
> Channel ID i = 0xA98381
>
> Exclusive, Channel 1
>
> Jun 9 12:07:09.600: ISDN Se0/0/0:23 Q931: TX ->
> SETUP pd = 8 callref =
> 0x03CC
>
> Bearer Capability i = 0x8090A2
>
> Standard = CCITT
>
> Transfer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98397
>
> Exclusive, Channel 23
>
> Calling Party Number i = 0x1180,
> '447980788157'
>
> Plan:ISDN, Type:International
>
> Called Party Number i = 0xA1
>
> Plan:ISDN, Type:National
>
> Jun 9 12:07:09.724: ISDN Se0/0/0:23 Q931: RX <-
> RELEASE_COMP pd = 8
> callref = 0x83CC
>
> Cause i = 0x80DA - Segmentation error
>
> Jun 9 12:07:09.740: ISDN Se0/0/0:23 Q931:
> pak_private_number: Invalid
> type/plan 0x0 0x0 may be overriden; sw-type 3
>
> Jun 9 12:07:09.744: ISDN Se0/0/0:23 Q931: Applying
> typeplan for sw-type
> 0x3 is 0x2 0x1, Called num 20
>
> Jun 9 12:07:09.744: ISDN Se0/0/0:23 Q931: TX ->
> SETUP pd = 8 callref =
> 0x03CD
>
> Bearer Capability i = 0x8090A2
>
> Standard = CCITT
>
> Transfer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98397
>
> Exclusive, Channel 23
>
> Calling Party Number i = 0x1180,
> '447980788157'
>
> Plan:ISDN, Type:International
>
> Called Party Number i = 0xA1, '20'
>
> Plan:ISDN, Type:National
>
> Jun 9 12:07:09.824: ISDN Se0/0/0:23 Q931: RX <-
> RELEASE_COMP pd = 8
> callref = 0x83CD
>
> Cause i = 0x809C - Invalid number format
> (incomplete number)
>
> Jun 9 12:07:09.844: ISDN Se0/0/0:23 Q931: TX ->
> DISCONNECT pd = 8
> callref = 0x9C4E
>
> Cause i = 0x809C - Invalid number format
> (incomplete number)
>
> Jun 9 12:07:09.924: ISDN Se0/0/0:23 Q931: RX <-
> RELEASE pd = 8 callref
> = 0x1C4E
>
> Jun 9 12:07:09.924: ISDN Se0/0/0:23 Q931: TX ->
> RELEASE_COMP pd = 8
> callref = 0x9C4E
>
>
>
> Simon May
>
> Simon.may at ihs.com
>
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
____________________________________________________________________________________Ready for the edge of your seat?
Check out tonight's top picks on Yahoo! TV.
http://tv.yahoo.com/
More information about the cisco-voip
mailing list