[cisco-voip] block 411

[Lelio Fulgenzi]

hmmm, i don't see how 9.@ would recognize someone dialing 9411 since 411 is a service number and there is no 411 area code.

i think you might have another route pattern it is hitting.

you can also check off urgent route pattern so it doesn't wait for any other digits.




--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Barron, Stephen M. 
  To: Lelio Fulgenzi ; Carter, Bill ; cisco-voip at puck.nether.net 
  Sent: Tuesday, June 12, 2007 3:10 PM
  Subject: RE: [cisco-voip] block 411


  I think my real problem is alternate matches.  Even though I block 9.411 if I dial 94112222222 it matches the long distance 9.@ and the Telco only recognizes 411 and ignores the rest of the digits.  

  Stephen Barron
  Network Engineer




  This communication is from a law firm and may contain confidential and/or privileged information. If it has been sent to you in error, please contact the sender for instructions concerning return or destruction, and do not use or disclose the contents to others. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070612/81dfcb45/attachment.html