[cisco-voip] E1 unbalanced cable for MFT interface?

[David Sullivan]

cisco-voip-bounces at puck.nether.net wrote:
> I was hoping to find a manufactured cable, I don't think my
> local vendor does very many foreign E1 assemblies..he'd probably get
> it wrong.... 

I've not seen pre-manufactured cables like that, the way we've converted
our G.703 terminated ISDN lines to UTP is using baluns like 

http://shrunk.net/6b4dec2d-www.blackbox.co.uk (search for G.703 balun if
the URL breaks)

They can also supply the BNC cables and the UTP side is just a UTP patch
lead. If you shop around you can probably find them a bit cheaper from
somewhere else but those will definitely do what you need.

David.
-----------------------------------------------------------------------------
This communication may contain privileged or confidential information which
is for the exclusive use of the intended recipient.  If you are not the
intended recipient, please note that you may not distribute or use this
communication or the information it contains.  If this e-mail has reached you
in error, please delete it and any attachment.

Internet communications are not secure and Barnet College does not accept
legal responsibility for the content of this message.  Any views or opinions
expressed are those of the author and not necessarily those of Barnet College.

Please note that Barnet college reserves the right to monitor the
source/destinations of all incoming or outgoing e-mail communications.
-----------------------------------------------------------------------------