[cisco-voip] E1 unbalanced cable for MFT interface?

[Jason Aarons (US)]

It's the wrong gender, needs to be female (that was why I noted I was
trying to avoid gender changers) and would then I would need a CAT5
cable between that part and the MFT interface. More changers/parts than
I hoped for. 

Cisco doesn't OEM what I'm looking for, thus I was hoping for a 3rd
party recommendation of a manufactured cable. There are also imbalances
between the mediums to be accounted for.

Would the MT242A-F-UK work?
http://www.blackbox.co.uk/solutions/display.asp?cs=dvh&id=1&doc=mt242a-m
&tx=WAN&sx=G.703/G.704%20Converters#moreinfo

-----Original Message-----
From: Robert Kulagowski [mailto:bob at smalltime.com] 
Sent: Wednesday, June 13, 2007 11:22 AM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] E1 unbalanced cable for MFT interface?

> I need a BNC Female to RJ-48 cable for my VWIC2-MFT-T1/E1, Cisco
doesn't 
> make this, anyone have a cable supplier I can order from? I'm trying
not 
> to use barrel connectors, etc. I'm also thinking about a custom cable 
> assembly if I have to..not sure of pinouts...

Cisco does make one:
CAB-ADPT-75-120=


-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.