[cisco-voip] missing trace information in trace files

[Lelio Fulgenzi]

wow....why is it on the server the MGCP is registered to? I would have though it would have been on the one my phone is registered too.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Lelio Fulgenzi 
  To: Ryan Ratliff 
  Cc: cisco-voip at puck.nether.net 
  Sent: Wednesday, June 13, 2007 5:07 PM
  Subject: Re: [cisco-voip] missing trace information in trace files


  Yup - I'm looking on the server where my phone is registered for sure. Checked it again. And again during this message. ;)

  Do you think that summary will appear on the subscriber on which the MGCP gateways are registered? I'll check there.....

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

    ----- Original Message ----- 
    From: Ryan Ratliff 
    To: Lelio Fulgenzi 
    Cc: cisco-voip at puck.nether.net 
    Sent: Wednesday, June 13, 2007 5:04 PM
    Subject: Re: [cisco-voip] missing trace information in trace files


    Are you sure you're looking at the server where the phones are  
    registered?   That tracing comes from DA (digit analysis) and that  
    will only occur where the device is registered.   If you only see it  
    for incoming calls it sounds like your MGCP gateway(s) are not  
    registered to the same server your phones are.

    -Ryan

    On Jun 13, 2007, at 4:57 PM, Lelio Fulgenzi wrote:

    This is really wierd since I don't even see the PSS in some calls any  
    more.


    ------------------------------------------------------------------------ 
    --------
    Lelio Fulgenzi, B.A.
    Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
    (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo  
    buffalo."      WJR
    ----- Original Message -----
    From: Lelio Fulgenzi
    To: cisco-voip at puck.nether.net
    Sent: Wednesday, June 13, 2007 4:36 PM
    Subject: [cisco-voip] missing trace information in trace files

    I used to be able to see a nice summary in the trace files which  
    showed which route pattern a call hit. I don't seem to be getting  
    that information anymore. Something like this. But now it's only for  
    incoming calls.
    |CallingPartyNumber=38003
    |DialingPartition=UoGSysDN_G31_PT
    |DialingPattern=37023
    |FullyQualifiedCalledPartyNumber=37023
    |DialingRoutePatternRegularExpression=(37023)
    |DialingWhere=
    |PatternType=Enterprise
    |PotentialMatches=NoPotentialMatchesExist
    |DialingSdlProcessId=(0,0,0)
    |PretransformDigitString=37023
    |PretransformTagsList=SUBSCRIBER
    |PretransformPositionalMatchList=37023
    |CollectedDigits=37023
    |UnconsumedDigits=
    |TagsList=SUBSCRIBER
    |PositionalMatchList=37023
    |VoiceMailbox=
    |VoiceMailCallingSearchSpace=
    |VoiceMailCallingSearchSpace=
    |VoiceMailPilotNumber=
    |AlertingName=
    |RouteBlockFlag=RouteThisPattern
    |RouteBlockCause=0
    |InterceptPartition=UoGSysDN_G31_PT
    |InterceptPattern=37023
    |InterceptWhere=
    |InterceptSdlProcessId=(9,35,1)
    |InterceptSsType=150994948
    |InterceptSsKey=565
    |OverlapSendingFlagEnabled=0
    |WithTags=

    Anyone have any ideas? Did a recent upgrade change this? Grrrr.

    I have detailed traces set on the active subscriber of my phone. I  
    have all settings checked except:
    Enable H245 Message Trace
    Enable All GateWay Trace
    Enable SIP Stack Trace
    Enable SIP Call Processing Trace
    Enable Keep Alive Trace
    Device Name Based Trace Monitoring
    ------------------------------------------------------------------------ 
    --------
    Lelio Fulgenzi, B.A.
    Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
    (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo  
    buffalo."      WJR


    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip
    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070613/bc75afce/attachment.html