[cisco-voip] Third party phone callmanger express

[tele]

Yes it's possible to use third party SIP phone with CME.
You need to configure something like:

voice register global
 mode cme
 source-address 192.168.5.223 port 5060
 max-dn 50
 max-pool 36
 timezone 13
 time-format 24
 hold-alert
 tftp-path flash:
 create profile sync 0380829064185296
!
voice register dn  1
 number 11
 call-forward b2bua noan 11111 timeout 10
 name 11
 no-reg
 label Reception - 11
!
voice register pool  1
 id mac 000B.8204.36AD
 number 1 dn 1
 voice-class codec 1


for SIP you need to use voice register dn and pool and not ephones, for
huntgroup you use voice hunt-group command.

FAC Feature Access Code didn't work for me, but with transfer and
callforward no big problem.

All this kind of configuration for SIP are explained in the CCME
administration documentation. look:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_book09186a00807c5776.html


:tele


On Wed, 2007-06-13 at 16:55 +0200, Rupp Christian wrote:
> Hi 
> 
> A customer of me want to connect a Sony Ericsson Mobile P990 on a
> callmanager express 4 over WiFi and SIP. 
> Is it possible to register a third party SIP phone to callmanger
> express? 
> Do you have some experience or an example config? What features
> (transfer, call frwd all) you have?
> 
> Thanks for the help!
> 
> Regards, 
> Christian
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip