[cisco-voip] 4.1 outbound caller id on PRI

[Lelio Fulgenzi]

if you want the same callerid to appear on all calls, you can also use the 
CLID command.


http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a008041ef72.html#wp1104547


----- Original Message ----- 
From: "May, Simon" <Simon.May at ihs.com>
To: <cisco-voip at puck.nether.net>
Sent: Sunday, June 17, 2007 8:56 AM
Subject: Re: [cisco-voip] 4.1 outbound caller id on PRI


>I have the had the same problem ... it looks like the voice translation
> is wrong..
>
> Try this:-
>
> voice translation-rule 100
>  rule 1 /^2/ /9165551234/
>
> (assuming the extension no. begins with 2)
>
> voice translation-profile to_outside
>  translate calling 100
>
> then configure the profile on the outgoing dial-peer (not on the ephone)
>
> dial-peer voice 2 pots
> description ** T1 PRI pots dial-peer **
> translation-profile outgoing profile1
> destination-pattern 9T
> port 0/0/0:23
>
> Use "debug voice translation" to see the translation happening
>
>
> Hope that helps
>
> Simon
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
> cisco-voip-request at puck.nether.net
> Sent: 14 June 2007 04:37
> To: cisco-voip at puck.nether.net
> Subject: cisco-voip Digest, Vol 52, Issue 105
>
> Send cisco-voip mailing list submissions to
> cisco-voip at puck.nether.net
>
>
> Message: 3
> Date: Wed, 13 Jun 2007 16:06:05 -0700
> From: chris vashel <chris at forte-systems.com>
> Subject: [cisco-voip] CME 4.1 outbound caller id on PRI
> To: cisco-voip at puck.nether.net
> Message-ID: <4670785D.6070009 at forte-systems.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> I am having trouble figuring out how to configure CME 4.1 to send caller
>
> id on outbound calls.  it is sending the extension number currently.
>
> it is a pri but no DID so all outbound calls should appear to come from
> the same number.
>
> i have tried
> dialplan-pattern 1 9165551234 extension-length 3
>
> and
>
> voice translation-rule 100
>  rule 1 /\(^1..\)/ /9165551234/
>
> voice translation-profile to_outside
>  translate calling 100
>
> ephone-dn  12  dual-line
>  translation-profile outgoing to_outside
>
> debug translation detail does not show that outbound translation to be
> happening  but test voice translation-rule 100 130 show the rule to work
>
> any ideas?
>
> thanks
> chris
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>