[cisco-voip] CCM4.1 AD Integrated, upgrade to 5...

[Jonathan Charles]

Actually, the error message was in the Backup06-25-07.log file for DMA...


Jonathan

On 6/26/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> It turned out two users did not have first and last names and were
> causing it to fail...
>
> However, the TAR file is only 15MB.... shouldn't it be about the same
> size as the backup? or at least close to?
>
>
>
> Jonathan
>
> On 6/26/07, Ryan Ratliff <rratliff at cisco.com> wrote:
> > Is that from installdbw1.log or another log file?  Validation errors
> > should be in installdbw1.log.
> >
> > The domain name for the server is My Computer->Properties, Network
> > Identification->Properties->More.
> >
> > -Ryan
> >
> > On Jun 25, 2007, at 7:03 PM, Jonathan Charles wrote:
> >
> > Here is the error message:
> >
> > [03:55:54 PM]   [03:55:27 PM]   --- Begin Consolidating Logs (Phase 4
> > of 5)
> > [03:55:55 PM]   [03:55:37 PM]   --- End -- Load, Transform, and
> > Validate CCM Database
> > [03:55:55 PM]   Failure, Windows-based W1 Migration Verification
> > [03:56:25 PM]   [Error] modExportDatabase=Failure
> > [03:56:25 PM]   [Error] Could not complete database processing
> > successfully.
> > [03:56:25 PM]   [Error] Failed to verify Cisco CallManager database
> > and directory backed up data.
> > [03:56:25 PM]   [Error] The database and/or directory cannot be
> > migrated as they are.
> > [03:56:25 PM]   [Error] Correct the database and/or directory
> > information and run DMA again.
> > [03:56:25 PM]   [Error] Verification of DB in IDS failed. Retaining
> > the TAR file as it is.
> > [03:56:25 PM]
> > [03:56:25 PM]   Backup information file DMABackupInfo.inf saved to D:
> > \DMA.
> >
> > It never even attempts to validate.
> >
> >
> >
> > Jonathan
> >
> > On 6/25/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > Because that is what the error message in the DMA log says....
> > >
> > > How do you add the FQDN to the box without adding it to the domain?
> > >
> > >
> > >
> > > Jonathan
> > >
> > > On 6/25/07, Ryan Ratliff <rratliff at cisco.com> wrote:
> > > > Ick, adding servers to the domain is such a pain in the butt.
> > > >
> > > > I'm not sure why DMA is failing.  You can set the FQDN of the server
> > > > to anything you wish, regardless of whatever domain/workgroup the
> > > > server belongs to.
> > > >
> > > > What leads you to the conclusion of a hostname mismatch causing the
> > > > DMA to fail?
> > > >
> > > > -Ryan
> > > >
> > > > On Jun 25, 2007, at 3:32 PM, Jonathan Charles wrote:
> > > >
> > > > So, in the past, I build a new server, restore the backup to it and
> > > > run DMA
> > > >
> > > > DMA fails cuz a hostname mismatch.
> > > >
> > > > Cuz it's not on the domain... of course, I can't join it, cuz the
> > > > existing PUB is there...
> > > >
> > > > So, I have to run DMA on an old crappy server...
> > > >
> > > > Wondering, anyone else run into this and know of a workaround...?
> > > >
> > > >
> > > >
> > > > Jonathan
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > >
> >
>