[cisco-voip] fxo port not hanging up

[Steve G]

I configured the 'supervisory disconnect dualtone mid-call' command under
the voice port.  I shut no shut the voiceport and waited to see what
happened.  It didn't fix the issue.  A couple hours later there was another
hung voiceport.

I have not had this problem before with h323.  If it were MGCP I could see
the logic, but this is a first for me.


On 3/2/07, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> add this to the voice-port:
>
> supervisory disconnect dualtone
>
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ft_ansds.htm
>
>
>
> Jonathan
>
>
>  On 3/2/07, Steve G <smgustafson at gmail.com> wrote:
>
> >  Hello I have an fxo port on a 2851 h323 gateway which is connected to a
> > Valcom 2003a paging controller.  I am having intermittent issues with the
> > fxo port staying offhook until I shut, no shut it.
> >
> > here is the config of the voice-port and the dial-peer.
> > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> > voice-port 0/0/0
> >  pre-dial-delay 0
> >  description paging 803[21]
> >
> > dial-peer voice 803 pots
> >  description Paging at 803[21]
> >  max-conn 1
> >  destination-pattern 803[12]
> >  port 0/0/0
> >  forward-digits 1
> > !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> >
> > Does anyone see anything that I might be missing?
> >
> > Steve
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070302/e3914bf1/attachment.html