[cisco-voip] fxo port not hanging up

[new look]

All,
I have the same problem in my IP Phone sys. I have CCM 4.1.3 and the MGCP GW is 2811 and I process a debug vpm signal then
I dailed My company No. then 1 (for AA) then Ext. 160 and hang up before 160 answer it still ringing

got this result

R#debug vpm signal
Voice Port Module signaling debugging is enabled
R#ter mon
R#
R#
*Mar  3 13:11:26.539: htsp_process_event: [1/0/1, FXOLS_ONHOOK, E_DSP_SIG_0000]f
xols_onhook_ringing
*Mar  3 13:11:26.539: htsp_timer - 125 msec
*Mar  3 13:11:26.667: htsp_process_event: [1/0/1, FXOLS_WAIT_RING_MIN, E_HTSP_EV
ENT_TIMER]fxols_wait_ring_min_timer
*Mar  3 13:11:26.667: htsp_timer - 10000 msec
*Mar  3 13:11:27.623: htsp_process_event: [1/0/1, FXOLS_RINGING, E_DSP_SIG_0100]
*Mar  3 13:11:27.623: fxols_ringing_not
*Mar  3 13:11:27.623: htsp_timer_stop
*Mar  3 13:11:27.623: htsp_timer_stop3 htsp_setup_ind
*Mar  3 13:11:27.623: [1/0/1] get_local_station_id calling num= calling name= ca
lling time=03/03 13:11  orig called=
*Mar  3 13:11:27.635: htsp_process_event: [1/0/1, FXOLS_WAIT_SETUP_ACK, E_HTSP_S
ETUP_ACK]
*Mar  3 13:11:27.635: fxols_wait_setup_ack:
*Mar  3 13:11:27.635: [1/0/1] set signal state = 0xC timestamp = 0fxols_check_au
to_call
*Mar  3 13:11:27.639: htsp_process_event: [1/0/1, FXOLS_PROCEEDING, E_HTSP_CONNE
CT]fxols_offhook_connect
*Mar  3 13:11:27.639: htsp_timer_stop
*Mar  3 13:11:27.647: htsp_process_event: [1/0/1, FXOLS_CONNECT, E_HTSP_VOICE_CU
T_THROUGH]fxols_connect_proc_voice
*Mar  3 13:11:27.647: htsp_call_bridged invoked
*Mar  3 13:11:27.659: htsp_process_event: [1/0/1, FXOLS_CONNECT, E_HTSP_VOICE_CU
T_THROUGH]fxols_connect_proc_voice
*Mar  3 13:11:32.091: htsp_digit_ready(1/0/1): digit = 1
*Mar  3 13:11:34.451: htsp_digit_ready(1/0/1): digit = 1
*Mar  3 13:11:34.743: htsp_digit_ready(1/0/1): digit = 6
*Mar  3 13:11:35.143: htsp_digit_ready(1/0/1): digit = 0
*Mar  3 13:11:35.451: htsp_digit_ready(1/0/1): digit = #


So can you help please???

----- Original Message ----

From: Jason Aarons (US) <jason.aarons at us.didata.com>
To: Steve G <smgustafson at gmail.com>
Cc: ciscovoip <cisco-voip at puck.nether.net>
Sent: Saturday, March 3, 2007 3:08:27 PM
Subject: Re: [cisco-voip] fxo port not hanging up


Did you check with Valcom tech support about your 2003A disconnect settings.  Othan than bad dsps or a debug vpm signal.
 
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Steve G
Sent: Friday, March 02, 2007 7:39 PM
To: Jonathan Charles
Cc: ciscovoip
Subject: Re: [cisco-voip] fxo port not hanging up
 
I configured the 'supervisory disconnect dualtone mid-call' command under the voice port.  I shut no shut the voiceport and waited to see what happened.  It didn't fix the issue.  A couple hours later there was another hung voiceport. 
 
I have not had this problem before with h323.  If it were MGCP I could see the logic, but this is a first for me.

 
On 3/2/07, Jonathan Charles <jonvoip at gmail.com> wrote: 
add this to the voice-port:
 
supervisory disconnect dualtone
 
 
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t2/ft_ansds.htm 
 
 
 
Jonathan

 
On 3/2/07, Steve G < smgustafson at gmail.com> wrote: 
Hello I have an fxo port on a 2851 h323 gateway which is connected to a Valcom 2003a paging controller.  I am having intermittent issues with the fxo port staying offhook until I shut, no shut it.
 
here is the config of the voice-port and the dial-peer.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
voice-port 0/0/0
 pre-dial-delay 0
 description paging 803[21]
 
dial-peer voice 803 pots
 description Paging at 803[21]
 max-conn 1
 destination-pattern 803[12]
 port 0/0/0
 forward-digits 1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Does anyone see anything that I might be missing?
 
Steve
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
 
 



Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 
____________________________________________________________________________________
It's here! Your new message!  
Get new email alerts with the free Yahoo! Toolbar.
http://tools.search.yahoo.com/toolbar/features/mail/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070303/cece09a2/attachment-0001.html