[cisco-voip] Installing the Executable ciscocm.4-1-DevPack-38.1 on Call Manager (Is There a Forced Reboot?)

Wed Mar 7 12:54:31 EST 2007

If you edit a phone's settings and save, it will force a restart of the device.  I believe Cisco started this in 4.0 or 4.1, but I am not 100% certain.

From: Miller, Steve [mailto:MillerS at DicksteinShapiro.COM] 
Sent: Wednesday, March 07, 2007 10:18 AM
To: Matt Slaga (US); Jonathan Charles
Cc: cisco-voip at puck-nether.net
Subject: RE: [cisco-voip] Installing the Executable ciscocm.4-1-DevPack-38.1 on Call Manager (Is There a Forced Reboot?)

I am aware that re-setting a phone will force it to pull down the firmware.  To what "changing phone details" are you referring?

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370 Fax (202)-330-5607
millers at dicksteinshapiro.com <mailto:millers at dicksteinshapiro.com>  

________________________________

From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com] 
Sent: Wednesday, March 07, 2007 10:15 AM
To: Miller, Steve; Jonathan Charles
Cc: cisco-voip at puck-nether.net
Subject: RE: [cisco-voip] Installing the Executable ciscocm.4-1-DevPack-38.1 on Call Manager (Is There a Forced Reboot?)

Keep in mind, however that if any of your devices reset or reboot (phones, 6608, etc) they will pull down new firmware.  That also goes for changing phone details in some callmanager versions.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Miller, Steve
Sent: Wednesday, March 07, 2007 9:04 AM
To: Jonathan Charles
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Installing the Executable ciscocm.4-1-DevPack-38.1 on Call Manager (Is There a Forced Reboot?)

Is it pretty much of a "double click and let it run type of installation" or is it more complicated with a lot of selection decisions as part of the install?  I can't find much documentation on this.  Thank you for your help!

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370 Fax (202)-330-5607
millers at dicksteinshapiro.com <mailto:millers at dicksteinshapiro.com>  

________________________________

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Wednesday, March 07, 2007 9:01 AM
To: Miller, Steve
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Installing the Executable ciscocm.4-1-DevPack-38.1 on Call Manager (Is There a Forced Reboot?)

No reboot is required for this DevPack IIRC

Just make sure any and all subscribers are up when you do it.

Jonathan

On 3/7/07, Miller, Steve <MillerS at dicksteinshapiro.com> wrote: 

I would like to install this during the day, but I can't afford a reboot on the Pub.  The documentation says that the machine doesn't "need to be rebooted", but does it ever reboot on its own?  Please advise.  Thank you!

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370 Fax (202)-330-5607
millers at dicksteinshapiro.com <mailto:millers at dicksteinshapiro.com> 

________________________________

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ruben Montes (Europe)
Sent: Wednesday, March 07, 2007 7:33 AM
To: Anthony Kouloglou; cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Cannot add phone to CCM 5.1(1)

Hi,

from my recent experience, whenever you do an upgrade from 4.x to 5.x, you have to ask Cisco for a License. As you know, CCM5.x is based in licenses, so when you do the upgrade you should take a temporal license that is created during the upgrade that makes it all work correctly, but if you want to add a device you can't: you should buy a license upgrade based in units from Cisco...

Regards,

Ruben

________________________________

De: cisco-voip-bounces at puck.nether.net en nombre de Anthony Kouloglou
Enviado el: mié 07/03/2007 13:27
Para: cisco-voip at puck-nether.net
Asunto: [cisco-voip] Cannot add phone to CCM 5.1(1)

Hi,
i am very new at 5.1 and i have found some difficulties adding a new phone:
I have installed a new 5.1 installation and imported a tar file from an old 4.1 installation.
The system booted and all the settings (phones, users etc) seem to be imported OK)
Then o tried to add a new 7960 phone but after i have given the MAC address all the rest necessary fields i clicked
add and i got:

Status 

Update failed. [4917] License file not loaded

I know it has something to do with the Phone Secutiry Profiles but that is as far as i get.

Any ideas?

Thanks A lot

--------------------------------------------------------

This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. This communication may contain material protected by attorney-client, work product, or other privileges. If you are not the intended recipient or person responsible for delivering this confidential communication to the intended recipient, you have received this communication in error, and any review, use, dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, received, or sent on its network.  If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com
==============================================================================

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. This communication may contain material protected by attorney-client, work product, or other privileges. If you are not the intended recipient or person responsible for delivering this confidential communication to the intended recipient, you have received this communication in error, and any review, use, dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, received, or sent on its network.  If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com
==============================================================================
________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 

--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. This communication may contain material protected by attorney-client, work product, or other privileges. If you are not the intended recipient or person responsible for delivering this confidential communication to the intended recipient, you have received this communication in error, and any review, use, dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, received, or sent on its network.  If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com
==============================================================================

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070307/fa7d7456/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1323 bytes
Desc: image001.gif
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20070307/fa7d7456/attachment-0001.gif 