[cisco-voip] Outbound call routing

[Matthew Saskin]

If you're using MGCP it's all up to callmanager.  Using the 8.@ pattern 
to match and discarding predot, prepending the access code (9200?) 
should do the trick.  Is it the lack of a pause between access code and 
dial string that's tripping up the PBX?

-matt

James Williams wrote:
>> If you are connecting the PBX using a H323 Gateway you could introduce
>> this short pause using a comma in the destination-pattern of the
>> outbound pots dial-peer...
>>     
>
> Unfortunately, we're using MGCP here. Is there a way to do something similar with MGCP?
>
> -James
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>