[cisco-voip] DID Range

[Justin Steinberg]

Konstantin has the correct idea, just correcting a slight typo:

Translation pattern should be 4[2-6]XX which you can translate to the DN of
the receptionist.

On 3/14/07, Fedorov, Konstantin <kfedor at amt.ru> wrote:
>
>  Hi,
>
>
>
> Crate translation pattern 4[26]xx ---à Operator number.
>
>
>
> More precise numbers will be routed to DID , not matched to translation.
>
>
>
> -----------------------
> Sincerely Yours,
> Konstantin Fedorov
>   ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Lemon
> *Sent:* Wednesday, March 14, 2007 10:13 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] DID Range
>
>
>
> Hi,
>
> I got a customer with a DID range of say, 4200 - 4699, from the Telco. Now
> the customer wants all unassigned numbers to be routed to reception but
> these unassigned numbers are random and not continuous. Is there and easier
> way of doing this apart from going over the Route Plan Report, getting all
> unassigned numbers, and creating Device Profiles for them and forwarding
> them to reception????
>
> any help much appreciated.
>
> thnx
>
> charl
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070314/b3707de1/attachment.html