[cisco-voip] DID Range

[Frazee, Timothy]

You should be able to make something like a catch-all that would shove
the calls to the operator.

 

Example:

 

313-555-22XX DID range

 

Internal extensions are 22XX

 

Make a translation pattern that is 22XX that goes to the operator.

 

The system will always pick the best match. So if you have a phone that
is 2201, it will go for that before 22XX. 22XX translation pattern would
be the "catch-all".

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lemon
Sent: Wednesday, March 14, 2007 2:13 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DID Range

 

Hi,

I got a customer with a DID range of say, 4200 - 4699, from the Telco.
Now the customer wants all unassigned numbers to be routed to reception
but these unassigned numbers are random and not continuous. Is there and
easier way of doing this apart from going over the Route Plan Report,
getting all unassigned numbers, and creating Device Profiles for them
and forwarding them to reception???? 

any help much appreciated.

thnx

charl



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070314/7a6312e5/attachment.html