[cisco-voip] Unity 4.0(5) Error

[Pat Hayes]

This error generally indicates that when Unity tried to submit a message 
to exchange, it failed. The most likely cause for this would be your 
message store account (account running AvCsMgr) does not have send-as 
permissions for one or more subscriber accounts. If you're not getting 
reports from users of not receiving messages, it'll be a little hard to 
track down who it is without turning on traces. If you are able to find 
the person(s) having the problem, you can verify (and correct) the 
problem by going into ADUC, and checking their security tab. The message 
store account should have 'send-as' permissions set here.


-------- Original Message  --------
From: "Duane Priebe" <duane at theriverbank.com>
To: "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Unity 4.0(5) Error
Date: 3/14/2007 12:05 PM

> This error just started yesterday, and I havn't been able to find much
> info on it at all.  When it starts I get notified and it seems to happen
> much more often as a couple of hours go by until Unity fails and I have
> to reboot the server.  After that all seems to be fine for a while.  Any
> suggestions?  Thanks!
> 
> Event Type:	Error
> Event Source:	CiscoUnity_ConvMsg
> Event Category:	Error
> Event ID:	10015
> Date:		2007/03/14
> Time:		09:17:13
> User:		N/A
> Computer:	CM-UNITY-001
> Description:
> IAvDohMessage::Submit returned [0x800404dc] on line 859 of file
> e:\Views\cs_CU4.0.4.221\un_Core2\ConversationEng\AvStateSvr\AvSMsgSend.c
> pp
> 
> 
> Duane
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip