[cisco-voip] Debug on Inter-Cluster Trunk

[Lelio Fulgenzi]

Are there no subscribers in each cluster?

This link has helped me in the past.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094729.shtml


  ----- Original Message ----- 
  From: Christopher M. Bomba 
  To: Lelio Fulgenzi 
  Cc: cisco-voip at puck.nether.net 
  Sent: Wednesday, March 14, 2007 8:55 PM
  Subject: Re: [cisco-voip] Debug on Inter-Cluster Trunk


  I have both CallManagers set up in the trunk on both clusters.  I am pretty sure the trunk is set up fine.  I just would like to see what is being passed between the trunks.

  Chris



  -----Original Message-----
  From: Lelio Fulgenzi <lelio at uoguelph.ca>
  Sent: Wed, March 14, 2007 4:32 pm
  To: cbomba at s4nets.com, cisco-voip at puck.nether.net
  Subject: Re: [cisco-voip] Debug on Inter-Cluster Trunk

  This is a common issue when all the subscribers in the cluster are not 'linked' to the subscribers in the other cluster.

  Bascially, when you create an inter-cluster link, you have to create it on the publisher of cluster A to each of the subscribers of cluster B and vice versa. 3.3 (I believe) and higher allows you to create one link and add up to 3 extra IP addresses.

  This should fix it tickety-boo.


  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  ...there's no such thing as a bad timbit...

    ----- Original Message ----- 
    From: Christopher M. Bomba 
    To: cisco-voip at puck.nether.net 
    Sent: Wednesday, March 14, 2007 4:26 PM
    Subject: [cisco-voip] Debug on Inter-Cluster Trunk


    I have two CCM clusters.

    Cluster A

    Cluster B

    They are connected via inter-cluster trunk.  Cluster B is also connected to a PBX using a 6608 blade.

    CCM A ---ICT--- CCM B ---6608--- PBX

    When a phone from CCM A calls a PBX phone I get CLID and Name.  When a PBX phone calls a phone on CCM A I only get CLID.  Is there a way to run a debug on a trunk to see what is being sent from cluster to cluster?

    Thanks,

    Chris

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070314/a2d1dc27/attachment.html