[cisco-voip] Proxy-h323 function in 12.4

[Riley, Andrew]

Hi there.
 
I am doing some work with gatekeeper and found that the proxy-h323
command is not available in mainline 12.4, even though the command
reference states is a supported command. The process was quite easy in
12.3.
 
Has the proxy function been replaced by another possibly IPIPGW? 
 
Can anyone shed some light on how we do 'proxying' in 12.4?
 

Andrew Riley 
Technical Consultant 
Communication Services 

Getronics Australia Pty Limited
Getronics combines the service capabilities of the original Dutch
company with those of Wang Global, acquired in 1999, and of the Olivetti
systems and services division. We are ranked second worldwide in network
and desktop outsourcing and fourth in network consulting and integration
(Source: IDC 2002-2003).

2 Minna Close
Belrose NSW 2085
Australia
Mob: +61 (0)402 894 793
Fax:  +61 2 9847 7378
Email: andrew.riley at getronics.com

Communication Services | Security Services | Application Services |
Workspace Management Services | Technology Transformation Services
www.getronics.com.au <http://www.getronics.com.au/> 

Please note that whilst we take all care, neither Getronics nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan for viruses. The contents are intended only for
use by the addressee and may contain confidential and/or privileged
material and any use by other than the intended recipient is prohibited.
If you received this in error, please inform the sender and/or addressee
immediately and delete the material.

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070316/c52e0aaa/attachment.html