[cisco-voip] extension numbers for outgoing calls in PRI line

Lelio Fulgenzi lelio at uoguelph.ca
Fri Mar 16 08:53:05 EST 2007


Sorry Gokhan - missed that part.

In the Cisco Voice Gateways and Gatekeepers book, page 317, it talks about CLID commands. You will need 12.4(4)T or higher. 

I'm guessing this is what you would look for. Not sure if CME has particular settings you can use.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: gokhan senol 
  To: Lelio Fulgenzi 
  Sent: Friday, March 16, 2007 9:42 AM
  Subject: Re: [cisco-voip] extension numbers for outgoing calls in PRI line


  hmm thanks for your answer
  but this is ccme not ccm
  no route pattern or external calling mask


  ----- Original Message ----
  From: Lelio Fulgenzi <lelio at uoguelph.ca>
  To: gokhan senol <gokhanciscottl at yahoo.com>; cisco-voip at puck.nether.net
  Sent: Friday, March 16, 2007 3:05:12 PM
  Subject: Re: [cisco-voip] extension numbers for outgoing calls in PRI line


  you need to set the external calling mask on your phone and then use route patterns that have 'use line's external calling mask' set.

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  ...there's no such thing as a bad timbit...

    ----- Original Message ----- 
    From: gokhan senol 
    To: cisco-voip at puck.nether.net 
    Sent: Friday, March 16, 2007 7:25 AM
    Subject: [cisco-voip] extension numbers for outgoing calls in PRI line


    hi



    in callmanager express 3.3....

    i want to my extension numbers is displayed when i make outside calls from my pri  line

    But even the ppl from pstn can call my DID numbers, when i call outside ,they see my PRI main number. They dont see my extension number

    this is the issue with telco or should i do any config under pri line

    they see 3555700 but i want to they  see my number which is 3555722. 

    thankx



    my pri line config is below

    !
    dial-peer voice 1 pots
     corlist outgoing external
     description calls over pri
     translation-profile incoming prefix
     destination-pattern 9T
     direct-inward-dial
     port 0/0/0:15




----------------------------------------------------------------------------
    No need to miss a message. Get email on-the-go 
    with Yahoo! Mail for Mobile. Get started. 


    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip





------------------------------------------------------------------------------
  We won't tell. Get more on shows you hate to love
  (and love to hate): Yahoo! TV's Guilty Pleasures list.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070316/699c11a3/attachment-0001.html 


More information about the cisco-voip mailing list