[cisco-voip] FXO Disconnect problem

[Paul Choi]

I'm confused. Could you please clarify a little bit?

Does phone continually ring after phone two is placed
on-hook or just a few times? If phone one rings a few
times after phone two hangs up, this is normal FXO
port behaviour. (Don't you now wish you used digital
lines instead?) There is no 'fix' for this and it's
something that you or your users will have to get used
to.


--- new look <newlook110 at yahoo.com> wrote:

> During the deployment of one of our solutions I
> faced the below described problem:
>  
> As shown in the attached figure, this is the actual
> connection between the devices.
>  
> 1) We configured the router dial peers and (phone-2)
> can call (phone-1) successfully by calling “222”.
> 2) Then after I get the tone from the router FXO
> port I press “111” and phone1 starts to ring.
> 3) If phone-1 goes off-hock the call is established
> successfully.
> 4) The problem is if phone-1 is still ON-hock and
> ringing and phone-2 goes ON-Hock. phone-1 remains
> ringing although ph-2 is on-hock.In order to stop
> this problem what should we do.



 
____________________________________________________________________________________
8:00? 8:25? 8:40? Find a flick in no time 
with the Yahoo! Search movie showtime shortcut.
http://tools.search.yahoo.com/shortcuts/#news